做雨棚行業十幾年多，露臺、院子做雨棚多的原因在于遮陽、房子滲水、小區預防高空拋物、茶室布置等。

　　I have been working in the awning industry for over 6 years, and the most common reasons for doing awning on terraces and courtyards are sun shading, water seepage in houses, prevention of high-altitude littering in residential areas, and tea room layout.

　　用處千千萬，但雨棚屬于是定制款式，特別每一戶的墻體結構差異之大，且面積大小都不同，該如何明確自家的現場如何做雨棚好。

　　The rain shelter has countless uses, but it is a customized style, especially since the wall structure of each household varies greatly and the area size is different. How to clarify how to make a good rain shelter on site.

　　通過以上四張照片可以發現一個共同點，墻體結構是不同，但做雨棚都離不開長度、寬度兩個數據。

　　From the above four photos, we can find a common point that the wall structure is different, but the length and width data are essential for making a canopy.

　　雨棚的是固定式的，只要確定好了固定墻體一面后，整個棚子的固定方案再結合大概的長 寬尺寸落實即可

　　The canopy is fixed, as long as one side of the fixed wall is determined, the fixing scheme of the entire canopy can be implemented based on the approximate length and width dimensions

　　落實款式之前大家要明確 長度的數據是決定立柱支撐的數量的

　　Before implementing the style, everyone should clarify that the length data determines the number of column supports

　　比方：

　　example:

　　長度1米-5米配置2根立柱

　　Configure 2 columns with a length of 1-5 meters

　　長度5.5米-9米配置3根立柱

　　Configure 3 columns with a length of 5.5-9m

　　長度9.5米-12.5米配置4根立柱

　　Configure 4 columns with a length of 9.5-12.5 meters

　　確定好現場所配置的支撐數量后，接下來就是根據寬度數據確定支撐的方案

　　After determining the number of supports configured on site, the next step is to determine the support plan based on the width data

　　下面給大家列出幾個常做的尺寸方案：

　　Below are several commonly used size schemes:

　　1、伸出款式2-4米做法：

　　1. Extension style 2-4 meters, method:

　　一面固定墻體，一面彎弧水槽固定標配立柱2根。

　　One side is fixed to the wall, and the other side is fixed to the curved water trough with 2 standard columns.

　　2、伸出寬度4米-6米做法：

　　2. Extension width of 4-6 meters method:

　　支撐和支撐的間距控制在4米，棚子寬度超出4米后的尺寸則加裝支撐+頂梁進行對棚子進行承重分擔

　　The maximum distance between supports is controlled at 4 meters. If the width of the shed exceeds 4 meters, additional supports and top beams are installed to share the weight of the shed

　　3、伸出寬度6米-8米做法：

　　3. Extension width 6-8 meters method:

　　伸出寬度大，一體棚子注重牢固性問題，除了再水槽底下配置一排立柱外，在中間部位需加裝多一排立柱+頂梁對整個棚子的受力進行分擔。

　　The extended width is large, and the most important issue for the integrated shed is safety and stability. In addition to installing a row of columns under the sink, an additional row of columns and top beams need to be added in the middle to share the stress of the entire shed.

　　現場布局不同，或者有業主并不喜歡過多立柱

　　The on-site layout is different, or some homeowners do not like too many columns

　　在確保整體受力平衡的情況下，可以考慮用彎梁來替代立柱的支撐點：

　　Under the condition of ensuring overall force balance, it is possible to consider using curved beams to replace the support points of columns:

　　彎梁用于取代原有的立柱支撐，給與業主更寬敞的地面使用空間和使用效果。

　　Bent beams are used to replace the original column supports, providing homeowners with more spacious ground use space and effectiveness.

　　但彎梁所相應的長度和現場情況同樣也需要講究

　　But the corresponding length of the curved beam and the on-site situation also need to be carefully considered

　　現場是否合適采用彎梁代替立柱的支撐方式可找工廠的設計師進行溝通即可

　　Whether it is appropriate to use curved beams instead of columns for support on site can be discussed with the factory designer

　　本文由  濟南雨棚 情濟南雨棚 情奉獻.更多有關的知識請點擊  http://www.sinwida.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is dedicated by Jinan Rainshed For more related knowledge, please click http://www.sinwida.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.